• Fabric Entrance Section With lath fabric centering and Load-Cell, it precisely controls fabric movement along the rubber inlet, especially suitable for fine knit fabrics.
• ▪ Input Opener Group It includes two engines.
• This plays an important role in opening the right and left edges of the fabrics.
• ▪ 616 mm diameter main heating cylinder, tested at 8 bar pressure, driven by 11 kW motor reducer and mounted with special bearings resistant to high temperatures ▪ Steaming box that moistens the fabric homogeneously at the entrance ▪ Brushes that clean the particles accumulated on the main heating roller ▪ Cooling the rubber blanket with water at various points ▪ Grinding roller of the blanket surface and dust extraction system during grinding.
|HEATING CYLINDER DIAMETER / WIDTH||Ø 616 mm. / 2600 mm|
|WORKING WIDTH||700 mm. – 2400 mm.|
|Motor power||2400x3962x67 mm.|
|WORKING SPEED||40 m/dak|
|ELECTRICAL SUPPLY||380-440V, 50-60 Hz|
|ELECTRICITY CONSUMPTION||25 kW +/-5%|
|AIR PRESSURE||0-6 bar|
|AIR CONSUMPTION||50 NL/sa|
|STEAM CONSUMPTION (Max.)||60 kg/sa|
|water consumption||1 m³/sa|